Swiss
traditions.
Quality
and high-tech
engineering
solutions.
EN

High pressure
water-jet systems
WOMA

Engineering company ENCE GmbHЭНЦЕ ГмбХ»), being an authorized representative of WOMA, Germany in the CIS countries, offers high pressure water-jet pump systems to solve any problems connected with industrial cleaning, maintenance and decontamination. Through representative offices ENCE GmbH («ЭНЦЕ ГмбХ») in Russia (Moscow, Nizhny Tagil, Lipetsk, Cherepovets), in Ukraine (Kiev), Kazakhstan (Almaty, Atyrau), Uzbekistan (Tashkent) one can receive detailed information about water-jet pump systems WOMA and a wide range of accessories and devices for effective operation of the systems WOMA.

Description

Under DAP (DDU) or DDP terms, ENCE GmbH («ЭНЦЕ ГмбХ») equips customers in the CIS countries with fixed and mobile high-pressure and extra-high-pressure water-jet pump systems with operating data up to 3000 bar and water flow up to 3070 l/min, complete with electric motors or internal combustion engines, piston pumps, controls and monitoring devices, nozzles and accessories. Packaged water-jet pump units with water heating with operating pressure up to 800 bar for cleaning of pipes, reservoirs, foundry moulds and containers can be offered as an option.

Water-jet pump units WOMA up to 3 000 bar
Produced copies

EcoPro 2500

  • Operating pressure 2500 bar
  • Flow rate 11.2 l/min
  • Operating medium cold
  • Power 63 kW

The system is the optimal choice for its weight and dimensions, it is easily movable, with quick start-up, fully automated pressure control of the pump system and speed using the valve system, and cost-effective in terms of fuel consumption.

______________________________________________


Ecomaster 250 M – 2500–3000 bar

  • Operating pressure 2500 - 3000 bar
  • Flow rate 15 - 40 l/min
  • Operating medium cold
  • Power 77 - 145 kW

The system is used for cleaning of large-capacity vessels and pipelines. It is complete with pressure and speed control for long life time and cost-effective fuel consumption. Both diesel and electric designs are possible. Operation without water bypass. Increased external damage protection and noise protection.

______________________________________________


Ecomaster 400 M – 3000 bar

  • Operating pressure 2500 – 3000 bar
  • Flow rate 70 l/min
  • Operating medium cold
  • Power 260 kW

Application is the same as that of the previous one.

______________________________________________


Ecomaster MK3 – 3000 bar

  • Operating pressure 2500 – 3000 bar
  • Flow rate 18 - 26 l/min
  • Operating medium cold
  • Power 115 kW

The system is used for cleaning of large units and industrial buildings. Operating pressure of the pump unit varies from 2500 to 3000 bar and the unit combines all the advantages of the previous units.

______________________________________________


Ecomaster 1000M – 3000 bar

  • Operating pressure 2000 - 3000 bar
  • Flow rate 80 - 200 l/min
  • Operating medium cold
  • Power 580 kW

The unit is used for large-scale cleaning and has fully automated pressure and speed control, it is equipped with noise-protective enclosure and external damage protection, has extended service life, it is cost-effective and can be supplied with diesel or electric motor.

______________________________________________


Ecomaster 550M – 3000 bar

  • Operating pressure 3000 bar
  • Flow rate 44 - 186 l/min
  • Operating medium cold
  • Power 500 kW

A mobile pump unit with automatic pressure and speed control which has all the advantages of the previous systems.

______________________________________________


TwinJet 2500 – 3000 bar

  • Operating pressure 2500, 2800, 3000 bar
  • Flow rate 52,40, 36 l/min
  • Operating medium cold
  • Power 300 kW

The twin water-jet pump system is used for cleaning large structures and industrial buildings. It is used for operation by means of two pump units with one or two jets. The unit is equipped with pressure and speed control system. The system allows to ensure long service life, save fuel or energy and to use more operation modes. The system is powered by diesel motor or electric motor.

Water-jet pump systems WOMA up to 1 500 bar
Produced copies

Ecomaster 550-700Z equipped with diesel motor.
(Ecomaster 400Z equipped with diesel motor).

  • Operating pressure 1000 - 1500 bar (400 – 1500 bar)
  • Flow rate 85 - 364 l/min (70 – 400 l/min)
  • Operating medium any temperature (cold)
  • Power 106 – 428 kW (180 – 300 kW)

The pump system is complete with pressure and speed control and has extended service life and minimal fuel consumption. It operates without water bypass, with automatic systems monitoring and is equipped with protective and noise-reducing enclosure. It can be complete with diesel or electric motor.

______________________________________________


Ecomaster 205Z equipped with electric motor
(Ecomaster 250Z equipped with electric motor)

  • Operating pressure 500 - 1500 bar
  • Flow rate 130 l/min (40 – 130 l/min)
  • Operating medium cold
  • Power 107 – 190 kW

The system combines all the advantages of the previous model.

______________________________________________


Ecocold 1000 TwinJet

  • Operating pressure 1000 bar
  • Flow rate 14 - 30 l/min
  • Operating medium cold
  • Power 63 kW

The pump system uses one or two separate high pressure pump units and can use one or two jets at a time, with the possibility of double water volume capacity for one jet. The system is concise, with easy and simple start-up, and can be transported on different means of transport. Moreover, it is equipped with automatic monitoring device, has minimal possible wear, extended service life and it saves fuel.

______________________________________________


Ecomaster 1000Z equipped with electric motor.
(Ecomaster 1000Z Boxer equipped with diesel motor)

  • Operating pressure 700 - 1500 bar (300 – 1500 bar)
  • Flow rate 180 - 1300 l/min (180 – 1700 l/min)
  • Operating medium cold
  • Power 500 – 800 kW

The systems have all the advantages of water-jet pump systems WOMA.

______________________________________________


Ecomaster 150Z

  • Operating pressure 400 - 1500 bar
  • Flow rate 25 - 136 l/min
  • Operating medium cold
  • Power 67 – 110 kW

The system has all the advantages of water-jet pump systems WOMA.

Water-jet pump systems WOMA up to 800 bar
Produced copies

EcoCold 350B, (EcoCold 500B)

  • Operating pressure 350 (500) bar
  • Flow rate 15 (21) l/min
  • Operating medium any temperature
  • Power 1,5 (15) kW

Manual operation with electric motor. The pump systems can have different operating pressure and use diesel. When using a hot box, medium temperature can reach up to 98°С.

______________________________________________


EcoCold 280 – 500 E

  • Operating pressure 280 - 500 bar
  • Flow rate 14 – 21 l/min
  • Operating medium any temperature
  • Power 7,5 -15 kW

The systems have all the advantages of the above pump systems WOMA.

______________________________________________


Ecomaster 400 ARP

  • Operating pressure 400 bar
  • Flow rate 860 l/min
  • Operating medium cold
  • Power 300 kW

The system is equipped with main data monitoring function and is used without water bypass. Either diesel or electric drive. The pump system can have mobile or fixed design and it is complete with noise protective enclosure.

______________________________________________


EcoTherm 600 bar (800 bar)

  • Operating pressure 100 – 600 (800) bar
  • Flow rate 26 (21) l/min
  • Operating medium hot
  • Power 37 kW

These pumps systems are complete with main data monitoring function, they have minimal possible weight and concise design, can be transported on a small power vehicle, and they use hot water.

Attachments, devices and tools for all water-jet pump systems WOMA

ENCE GmbH («ЭНЦЕ ГмбХ») offers a special program of attachments, devices and tools for all water-jet pump systems WOMA that includes the following components:

  • Manual nozzles with extension lance for cleaning calcination kilns
  • High-pressure jets for cleaning, protective layer removal and selective material removal
  • Self-propelled and actuated rotary nozzles for surface preparation
  • Cleaning heads for vessels, containers, mixers etc.
  • Positioners and spooling systems for cleaning heads and rotary nozzles
  • Heads and nozzles for pipe cleaning
  • Abrasive water-jet super-high pressure cutting systems for demounting of structures and equipment
  • Mobile systems for cleaning IBC containers
  • Module systems for waste water treatment

The pump systems have the following features:

  • Protective frame for safe helicopter transportation
  • Air-operated start, using either external compressed air of control panel
  • Ex- and fire protection class acc. to EEXIIeT3
  • Grounding of electrical parts
  • Exhaust gas cooling system
  • Gas detector
  • Air-operated pump control system, including electric control

For simultaneous operation of several super-high pressure nozzles WOMA Twin Jet system based on two directly coupled pumps has been developed.

Advantages of water-jet high-pressure technology
Description
  • A wide range of nozzles for various applications using only one system - cleaning, rust removal, cutting etc.
  • Small nozzle sizes for operation in hard-to-reach places.
  • Geometrically accurate nozzle movement, including straightforward, which makes adjustment to the weld profile possible.
  • Considerable increase in the amount of waste. Compared with dry sand blasting, the amount of waste is decreased by 98%.
  • Dust-free operation to perform other jobs, i.e. coating, simultaneously. Treatment of selective zones is also possible.
  • Selective multi-layer coating removal is possible
  • Very gentle operation of water-jet systems. Sensitive spots, like welds and connections, will not be damaged.
  • Applicable standards allow accurate quality assessment of surface cleaning using water-jet systems
  • Low salt content of the surface, because high-pressure water cleans the smallest pockets. On the contrary, sand blasting leads to pockets plugging and conservation of salts in them.
  • Water-jet treated surfaces ensure good adhesion and can be used underwater.
  • A wide range of abrasive nozzles enables to cut almost all structural materials. Thus, no internal stress, dust or slag occur.
Piston pumps of various types and power

Engineering company ENCE GmbH («ЭНЦЕ ГмбХ») can also supply separate components for water-jet pump systems WOMA, including piston pumps of various types and power:

Piston pump –ARP model

  • Operating pressure 320 - 400 bar
  • Flow rate 400 - 1700 l/min
  • Water temperature any
  • Power 106, 135, 183, 285, 425, 452, 525, 780 kW Weight 320 – 2610 kg

______________________________________________


Piston pump – Y – Line 1000 bar

  • Operating pressure 700, 850, 1000 bar
  • Flow rate 17, 19, 25, 33, 41 l/min
  • Water temperature any
  • Power 30, 34, 37, 40,46 kW
  • Weight 110 kg

______________________________________________


Piston pump – 02 – Line 750 bar

  • Operating pressure 200 - 750 bar
  • Flow rate 129 - 229 l/min
  • Water temperature any
  • Power 18 - 162 kW
  • Weight 50 – 350 kg

______________________________________________


Piston pump – 03 – Line 250 bar

  • Operating pressure 150, 200, 250 bar
  • Flow rate 170, 212, 341, 402 l/min
  • Water temperature any
  • Power 39, 59, 106, 133, 154 kW
  • Weight 100 – 325 kg

______________________________________________


Piston pump – Z – Line 1500 bar

  • Operating pressure 400 - 1500 bar
  • Flow rate 86 – 605 l/min
  • Water temperature any
  • Power 106 - 768 kW
  • Weight 311 – 2580 kg

______________________________________________


Piston pump – M – Line 3000 bar

  • Operating pressure 2000, 2500, 3000 bar
  • Flow rate 11, 30, 35, 40, 70, 106, 186 l/min
  • Water temperature any
  • Power 49, 94, 108, 147, 259, 403, 699 kW
  • Weight 117 – 2470 kg
Main water-jet pump systems WOMA applications
Description

ENCE GmbH («ЭНЦЕ ГмбХ»), with the help of the specialists and service engineers of its service centres in Ukraine (ООО «ИНТЕХ СА» (LLC INTECH SA), Kiev), в Russia (ООО «ИНТЕХ ГмбХ» (LLC INTECH GmbH), Moscow and Kazakhstan (ООО «ИНТЕХ СА» (LLC INTECH SA), Almaty), is ready to perform on a contract basis service maintenance of water-jet pump systems WOMA and separate piston pumps, to monitor technical conditions of the units and replace spare parts.

Engineering company ENCE GmbH («ЭНЦЕ ГмбХ») can also offer other types of pumps and pump systems for different industrial applications:

Additional Information

More information about high pressure water-jet systems can be found on the company's website www.ence-wp.devw.cpeople.ru

Our specialists are always there to help you

Our engineers will provide advice or additional technical information about the offered oil and gas production and transport equipment

Please send your RFQs for oil and gas production and transport equipment to our Technical Department.

+7 (495) 225 57 86