Swiss
traditions.
Quality
and high-tech
engineering
solutions.
EN

Models of hot and cold plate marking machine

In its program, Production and Engineering Company ENCE GmbH (ЭНЦЕ ГмбХ) highlights the most significant metallurgical equipment; this equipment complies with the highest international quality standards and may be offered to customers at competitive prices.

Example models of hot and cold plate marking machine

Engineering company ENCE GmbH (ЭНЦЕ ГмбХ) offers a variety of units, packages and associated equipment for rolling mills, coil steel hot dip galvanizing lines, strip painting and polymer coating lines, automatic steel strip pickling lines and sheet bending equipment. Among others company ENCE GmbH (ЭНЦЕ ГмбХ) can supply a hot and cold plate marking machine in accordance with the customer’s technical specification.

Engineering company ENCE GmbH (ЭНЦЕ ГмбХ) invites you to look into several configurations of supplied marking machines for plates.

Hot plate marking machine

1. Description

  • Cantilever along the roller conveyor, 1 carriage for marking head positioning at the roller conveyor center line.
  • A marking head is a dot matrix with seven nozzles
  • Paint: white solvent-based paint
  • Max. plate temperature: 850°C
  • Character number and size: at Customer’s option
  • Max. marking speed: to be defined depending on plate speed and character size (marking during plate conveyance)

2. Hot plate marking machine consists of:

  • machine (cantilever type),
  • storage and supply unit for feeding paint, compressed air and cooling water into the marking machine,
  • control cabinet for marking machine operation control,
  • a hot plate marking machine is operated by the operator via PC, installed on the control panel,
  • cabling and piping to connect marking machine with the storage unit and control cabinet (approximate length 5m from the marking machine)
Plate marking machine

1. Description

Cantilever along the roller conveyor, 1 carriage for marking and numbering head positioning at the roller conveyor center line. A numbering head travels up and down by means of pneumatic cylinder with side carriage for plate edge marking.

Top surface plate marking
Marking head: dot matrix, 16 nozzles
Ink: black
Max. plate temperature: 100°C
Character number and size: to be defined
Max. marking speed: to be defined depending on plate speed and character size
Top surface plate numbering
Marking head: needle
Marking area: 17×100mm
Plate edge marking
Marking head: inclined nozzle for continuous ink spraying
Inks: black on white strip
Max. steel temperature: 100°C
Number of characters: at Customer’s option
Max. marking speed: to be defined depending on the size of characters
Character height: at Customer’s option

2. Plate marking machine consists of:

  • machine (cantilever type),
  • storage and supply unit for feeding paint, compressed air and cooling water into the marking and stamping machine,
  • control cabinet for plate marking machine operation control
  • a hot plate marking machine is operated by the operator via PC, installed on the control panel,
  • cabling and piping to connect marking machine with the storage unit and control cabinet (approximate length 5m from the marking machine)
Our specialists are always there to help you

Our engineers will provide advice or additional technical information about the offered oil and gas production and transport equipment

Please send your RFQs for oil and gas production and transport equipment to our Technical Department.

+7 (495) 225 57 86