Swiss
traditions.
Quality
and high-tech
engineering
solutions.
The project for modernisation of sheet-leveling machines, LPM-1 and LPM-2, operated as the components of the cutting-to-length unit, APR-3, with the capacity 1125 thousand tons per year, maximum length 3000—24000 mm, thickness 5—25 mm, width 1000—2350 mm.
Engineering and delivery of submersible equipment for hot-dip galvanising lines. Half-bushings of submersible rollers made of stellen, barrels for submersible rollers made of stellen, half-bushings for stabilising rollers made of stellen, barrels for stabilising rollers made of stellen.
Development of the project of the continuous hot-dip galvanising line with the strip width 600-12-50 mm, strip thickness 0,3—2.0 mm, capacity 104 thousand tons per year.
Development of the project of the chemical coating application machine with the strip width 900-12-50 mm, strip thickness 0,35—2.0 mm, speed 60 m/minute.
The project of the liquid zinc storage bath provided with a pump for melted zinc pumping, with the heating rating up to 90 kW.
The project of the unit for polymeric coating of steel strips.
Development of the project and delivery of the strip centering system for the line of the continuous hot-dip galvanising unit:
Material: cold-rolled steel
Strip width: 200 — 1270 mm;
Strip thickness: 0,5 — 0,2 mm;
Strip tension, max: 2500 N
Strip speed: 180 m/minute.
Development of the project and delivery of the automatic shot blasting unit for processing of rolls with the diameter up to 415 mm, length up to 2605 mm.
Development of the project and delivery of the roll-grinding machine, with the maximum workpiece length 2200 mm, roll diameter up to 415 mm, roll weight 2500 kg.
Delivery of the three-blade fifth-generation rotary air blower with an integrated pulsation dampener, for air injection with the maximum flow rate up to 5418 nm/hour
Development of the project and delivery of the jet cooling section with a heat exchanger and a recirculation fan.
Development of the project and delivery of the electrostatic strip oiling apparatus, with the strip speed 15—200 m/minute, strip width 700-12-70 mm, strip thickness 0,2—1.2 mm.
Engineering and delivery of submersible equipment for the hot-dip galvanising line.
Large racers made of stainless steel with the stellen padding on the working surface with and without grooving, small racers made of stellen, large bearing caps made of stainless steel with the stellen padding on the working surface, small bearing caps made of stainless steel, large and small bushings made of stellen with and without grooving, brackets (legs) for the bottom drum, brackets (legs) for the stabilising roller and the adjusting roller, air knife nozzle jaws, water-cooled furnace rollers for the zone for heating by open flame of the annealing furnace, furnace rollers for the zone for heating by radiant tubes of the annealing furnace, stabilising and adjusting rollers, bottom drums, rollers for the stretching levelling machine, spare parts for the annealing furnace holdback.
Development of the project for modernisation of the zinc bath equipment for the continuous hot-dip galvanising unit ANGTs-2, with the capacity 136 thousand tons per year, for dynamo steel making.
Development of the project of the gas-collecting flare tip, with the blast furnace gas maximum flow up to 350 000 nm3/hour
Engineering and delivery of submersible equipment for hot-dip galvanising lines in the cold rolling workshop.
Bearings for the submersible roller made of stellen with the ceramic liner, retainer plates of bearings for the submersible roller made of stellen with the ceramic liner, bearings for the stabilising roller made of stellen with the ceramic liner, leveling machine rollers, chrome-coated rollers made of high-chromium steel, flattening rollers for the cutting unit, chrome-coated supporting rollers.
Submergible equipment: stellen clamping rings for the submersible roller’s bushing and stabilising rollers, stabilising rollers’ bushings, stellen retainer plates for bearings, stainless-steel retainer plates for bearings with ceramic inserts, roller cassettes for the machine for levelling by stretching.
Working rolls for the machine for levelling by bending and stretching, bottom drums with holes and stainless-steel riffling, adjusting rollers made of stainless steel, tension rollers, chrome-coated idle rollers, chrome-coated conveying rollers, working rollers for the stretching levelling machine.
Polyurethane-coated tension rollers, chrome-coated applying rollers made of stainless steel, chrome-coated rollers for prevention of corrugation, chrome-coated entry rollers for the looper, rubber-coated squeeze rollers, polyurethane-coated guiding rollers, rubber-coated supporting rollers, guiding bushings made of copper for the slitting unit.